Import Setting

Click System Settings - System Options - Import to go to Import Settings where you can set the import formats.

Click Import - Import file command and click Import Settings on the Import interface to also enter the Settings dialog box.

File Format - General

【Ignore Hidden elements】 : Controls whether to read hidden entities/surfaces/curves in the assembly file.

【Read curves】 : Controls whether to read curves.

【Read the original model file thumbnail】 : Control whether to read the original model file saved in the thumbnail, support SolidWorks/CATIA/NX format.

【Read point】 : Control whether to read the point.This feature supports reading spatial points from Creo, UG, CATIA, and SolidWorks models. These points are then imported as 'datum points'.

【Hide datum】 : Controls whether the datum of the imported model is displayed or hidden by default.

【Stitch mesh】 : Select stitch to do as a whole import, there is only one mesh in the feature panel; Without stitching, the grid is imported in blocks, and each grid in the feature panel is regarded as a grid.

【Read constraint】 : Controls whether to import the assembly fit relationship, which may affect the conversion efficiency.

【Document name source】 : A file in the format of CATIA. The component name recorded in the file may be different from the file name. When importing such files in CC, it is supported to read the part name information recorded in the file, and you can choose to use "file name" or "part name recorded in the file" as the name of the part document after import.

【Retain file name extension】 : When the document name source is "file name", control whether to retain the file name extension.

【Resolution】 : Set the precision of the imported model, only for non-grid class models.

【Automatic File Conversion upon Import】: When importing an assembly compressed package, automatic conversion is supported.

【Read Modeling History】: Supports parameterized conversion of SolidWorks and CATIA files.

File Format - NX

[Engineering drawing] : When importing NX file, the engineering drawing in the file is read by default.